Description
Green Element LED lighting will transform your outdoor environments. They have approved by CE,ROSH, IP68 UL-Listed ETC,lights to retrofit virtually any existing pool and spa with vibrant color – even those with just one light.
100% brighter than any on the market, these energy-efficient, lights deliver spectacular color to pools with a single incandescent light or pools with colored finishes, and breakthrough cost savings and installation versatility for new pools, spas and fountains. All-plastic, low-voltage design, combined with all-plastic thin SS Niche eliminates the need for bonding, grounding. The thin SS Niche also reduces cost for dig, steel and gunite because it is only 8MM slim front-to-back and mounts to the face of the rebar grid. Pool and spa lights are for wall or floor installs without a rock guard and can be positioned just 4 inches from lens to water level – perfect for steps, beach entries and fountains.
- CE,ROSH,IP68-Listed for installation in virtually any pool or spa niche
- 100% brighter* than any color LED light on the market
- Use up to 86% less energy than incandescent lights and last 10x longer
- 10 fixed colors and seven color-changing shows
- Can be installed in a little as 10M below the waterline, and on the wall or the floor without a rock guard
- 12V, 2-wire, all plastic design with no exposed metal and an unbreakable lens requires no bond, no ground for safe installation
- Programmable to match DMX512 or Dali signal.
- Available in 30, 50, 100 and 150-foot cord lengths
- Available in Stand-Alone or Network
- Low-profile ss Niche provides incredible installation savings for new construction
- Retrofit transformer kits available for easy high-to-low-voltage J-Box conversion
- AC12V transformer available for multi-light installations
- 17 color-changing shows available
Additional features
- Instant navigation to desired color or light show without cycling through sequence
- Dimming capabilities in increments of 20%
- Speed adjustment for light shows
- Access to 10 additional color options; expand customization options for special occasions, like school colors, sports, or the holidays
Notes need to be careful.
1. Do not connect AC110V, AC230V, or any voltage more than 12V to our lamp.
2. Do not let the lamp CONTINUOUSLY on more than 30 minutes when it is OUT OF WATER, if not, it will be easier hot and get burned.
Parameters
Input Voltage: 12V DC
Light Source: SMD 2835 LED
Watt: 10W AND 5w
Lumen: 10W=800lm,5w-400lm
Lamp body material: Plastic and resin
Dimension: D120xH15mm
Frequency of remote: 433Hz
Battery for remote: 12V, 23A/27A
Waterproof Grade: IP68(Can be put into water directly).
Power cable: with 3 meter
Life span: 50000 hours
Warranty: 2 Years
LED Color versions: Warm white(2700-3500K), Pure white(5500-6300K), RGB, RGBW, RGB/RGBW no remote(controlled by external controller)
Knowledge
1. The Resin Filled Pool Lamp is designed to replace halogen PAR56 Bulb or LED PAR56 Bulb, so it fits the old niche, customer doesn’t need to change old niche, power cable, and transformer.
And It can be wall mounted installation if you buy suitable accessories, so it will become flat lamp.
2. It is using resin filled technology, which is much better than LED PAR56 Pool Lamp in waterproof grade, and it is plastic material body, won’t be broken.
3. The lamp is using LED as light source, can help you save electricity bill.
4. Our Lamp can work with AC12V and DC12V at the same time.
5. RGB color is multicolor, including red, green, blue, cyan, purple, yellow, white, and some dynamic modes.
6. One remote can control 2 pieces or more quantity lamps, but better for you to connect AC12V transformer if you want them synchronous(showing the same color).
Advantages of our lamps to other suppliers’.
1. Our multicolor lamp has memory and switch off/on functions.
Memory means it can remenber its last color and start from the same when it is on next time.
Switch off/on means customers can change lamp’s color and mode by switching power off and on instead of remote.
2. 2 Years warranty and better waterproof grade.
3. Much more bright in the same watt.
4. The remote for multicolor lamp is RF version instead of IR, which can control much more far, and easier to operate.
Packing
1. If you choose the lamp in single color(red/green/blue/pure white/warm white).
*1 piece x LED Fountain Lamp
